Fullymax focuses on the high rate discharge pouch batteries, including power batteries for electric aviation aircraft (eVTOL), electric power , drones, electronic cigarettes, fast charging batteries,12V/48V Start/Stop batteries and jump starter for car, RC professional remote control models and toy , military and special equipment, etc. FULLYMAX batteries are also widely used in smart home like sweeping robots, vacuum cleaners, small power tools, etc.; 3C consumer electronics like remote control handles, beauty equipment, portable projectors, etc., smart Bluetooth products, medical equipment ,ect
Fullymax 22.2V 6250mAh 6S 30C li-po batteries with DEANS connector Fullymax 6250mAh 6S Lipo is an 22.2V 6250mAh LiPo battery. These 6250mAh 6S LiPo batteries provide high performance for F3C giant scale helicopters, Fix-wing aircraft, RC airplanes, F3A aerobatic,etc. Fullymax 6250mAh 22.2V LiPo battery is one of the top rank battery corporations with deep research and manufacturing on LI-PO by the effort of more than 130 professional engineers and technicians with 22 years exquisite battery technology.
The Fullymax brand holds the core values of "Customer first Integrity and professionalism Scientific innovation Win-win cooperation". All batteries are tailored for various scales of the RC Models such as electronic cars, nitro cars, airplanes, vessels and also other models, toys, electric tools, electric bikes, electric autos, digital products etc. |
Related Product
For other configurations (without discharge plug) with same cell model, please refer below table.
Battery pack | Model Description | Max cont. discharge | Burst (3Sec) | Dimensions H x W x L | Weight | Wh |
FB6250HP-1S | 3.7V 6250mAh 1cell | 30C | 60C | 9.5x45x153mm | 158.00g | 23.13 |
FB6250HP-2S | 7.4V 6250mAh 2cell | 30C | 60C | 18x46x153mm | 286.00g | 46.25 |
FB6250HP-3S | 11.1V 6250mAh 3cell | 30C | 60C | 27.0x46x153mm | 419.00g | 69.38 |
FB6250HP-4S | 14.8V 6250mAh 4cell | 30C | 60C | 35.6x46x153mm | 547.00g | 92.50 |
FB6250HP-5S | 18.5V 6250mAh 5cell | 30C | 60C | 43.6x46.5x154mm | 675.00g | 115.63 |
FB6250HP-6S | 22.2V 6250mAh 6cell | 30C | 60C | 53x46.5x154mm | 803.00g | 138.75 |
Product Feature
- Production in the most strict single cell capacity, voltage, resistance and discharge curve matching process.
- High quality and consistent performance.
- Long life
Application
Compatible with F3C giant scale helicopters, Fix-wing aircraft, RC airplanes, F3A aerobatic,etc.
The new plant will be located in the Dongjiang Bay Industrial Park, which will be a national high-end industrial park special for new energy, new information technology and intelligent equipment fields based on the “3+7” industrial park planning and deployment proposed by Huizhou relying on the Greater Bay Area, aiming to integrate Huizhou’s “1+4” industrial parks. The area of the new plant is estimated to be 30,000 square meters. With new high-end equipment and workshop environment, the goal is to build a high-end production line dedicated to high-end customers. |
Quality Management System |
Management Improvement according to international standards |
ISO9001 Quality Management System |
ISO14001 Environmental Management System |
Occupational Health And Safety Management System |
Hazardous Substance Process Management System |
Aeroepace Quality Systems AS9100D:2016 |
Safety and environmental Certificates capability&service |
|
Performance Test Capability |
|
FAQ
Q1. What are the diferences betwee high C-rate and low C-rate lithium? |
polymer (Li-Po) batteries.
|
Q2. How is a Li-Po battery made? |
When a Li-Po battery is made, five main aspects should be considered carefully: (1). Battery Pack should have suficient strength, so that the polymer battery inside could be efectively protected from mechanical shocks; (2). The polymer cell should be fixedto the battery pack onits large surface area - no cell movement in the battery packshould be allowed; (3). No sharp edge components should be inside the packcontaining the polymer battery, and meanwhile, suficient insulation layer between wiring and the cell should be used to maintain multiple safety protection; (4). Ultrasonic welding is recommended for polymer tab connection to obtain low-resistance, high-reliability and light-weight properties;(5). Polymer packs shouldbe designed carefully so that no shear force is applied, and also, no heat is generated even when leakage ocurs for mishaps. PCM from electrolyte leakage should be isolated as perfectly as posible, and narrow distance between bare circuit patterns should be avoided.
|
Q3.What are the gases inside a swelling cell, and are they toxic/dangerous? |
The gases vary depending on different situations: 1. If the gases were generated by electrolyte gas reaction, they would mainly beelectrolyte solvent components, for example: EC, DMC, EMS and so on; 2. If the gases were generated by overcharging, they would mainly be H2, CO, CO2,CH4 and so on; 3, If the gas were generated by improper sealing, they would mainly be H2, C2,H2and so on.
|
Q4. Why do we need formation process? |
Organic solvents easily decompose on the negative electrodes during charging, leading to battery swelling, drop of cell capacity, and unsafety caused by active
|
Q5. Why do Li-Po batteries bloat/swell? |
The Li-Po batteries may bloat or swell due to the following reason: 1. Overcharging:Normally, the maximum charge voltage is 4.2V for RC batteries. If the batteries were overcharged beyond 4.4V, electrolytic oxidation process would happen, which generates mass gas leading to battery swelling. 2. Overheat:When discharging in high temperature or high C rate, the temperature of the inner part of the battery can be even higher, which gasify the electrolyte and results in swelling. 3. Shot-circuit.:If short circuit happened, the cell voltage would drop very fast and the electrolyte would be reactive to generate gases, leading to battery swelling. 4, Sealing:If sealed without proper processing, the battery cell would have water and air in, so that the electrolyte would be reactive to generate gases, leading to battery swelling. |