Fullymax focuses on the high rate discharge pouch batteries, including power batteries for electric aviation aircraft (eVTOL), electric power , drones, electronic cigarettes, fast charging batteries,12V/48V Start/Stop batteries and jump starter for car, RC professional remote control models and toy , military and special equipment, etc. FULLYMAX batteries are also widely used in smart home like sweeping robots, vacuum cleaners, small power tools, etc.; 3C consumer electronics like remote control handles, beauty equipment, portable projectors, etc., smart Bluetooth products, medical equipment ,ect
Fullymax 11.1V 10000mAh 3cell 25C High Rate Discharge eVTOL LiPo Battery
Fullymax high capacity batteries provide high quality, reliable power for your RC,eVTOL,Quadcopter,Multirotor,Hexacopter,etc.
UAV model:
|
For other configurations (without discharge plug) with same cell model, please refer below table.
Battery pack | Model Description | Max cont. discharge | Burst (3Sec) | Dimensions H x W x L | Weight | Wh |
FB10000HP-1S | 3.7V 10000mAh 1cell | 25C | 50C | 8.9x67x198.0mm | 230g | 37 |
FB10000HP-3S | 11.1V 10000mAh 3cell | 25C | 50C | 25.2x65x196mm | 677g | 111 |
FB10000HP-4S | 14.8V 10000mAh 4cell | 25C | 50C | 36.5x67x198.0mm | 912g | 148 |
FB10000HP-6S | 22.2V 10000mAh 6cell | 25C | 50C | 52.8x66.5x197.5mm | 1354g | 222 |
FB20000HP-6S2P | 22.2V 20000mAh 12cell | 25C | 50C | 100x67x204mm | 2623g | 444 |
Product Feature
• Stable automatic stacking technology enables single-cell capacities 10000mAh.
• Higher capacity than comparable size lipo packs.
• Perfect match for high-performance models.
Application
Quadcopter/Multi-copter Drones/Fixed Wing UAV drone in fields of agricultural spraying, cargo delivery, military, police, surveying and mapping, engineering & construction,mining,environmental monitoring, aerial photography, electric aircraft (eVTOL),etc.
The new plant will be located in the Dongjiang Bay Industrial Park, which will be a national high-end industrial park special for new energy, new information technology and intelligent equipment fields based on the “3+7” industrial park planning and deployment proposed by Huizhou relying on the Greater Bay Area, aiming to integrate Huizhou’s “1+4” industrial parks. The area of the new plant is estimated to be 30,000 square meters. With new high-end equipment and workshop environment, the goal is to build a high-end production line dedicated to high-end customers. |
Quality Management System |
Management Improvement according to international standards |
ISO9001 Quality Management System |
ISO14001 Environmental Management System |
Occupational Health And Safety Management System |
Hazardous Substance Process Management System |
Aeroepace Quality Systems AS9100D:2016 |
Safety and environmental Certificates capability&service |
|
Performance Test Capability |
|
FAQ
Q1. What are the diferences betwee high C-rate and low C-rate lithium? |
polymer (Li-Po) batteries.
|
Q2. How is a Li-Po battery made? |
When a Li-Po battery is made, five main aspects should be considered carefully: (1). Battery Pack should have suficient strength, so that the polymer battery inside could be efectively protected from mechanical shocks; (2). The polymer cell should be fixedto the battery pack onits large surface area - no cell movement in the battery packshould be allowed; (3). No sharp edge components should be inside the packcontaining the polymer battery, and meanwhile, suficient insulation layer between wiring and the cell should be used to maintain multiple safety protection; (4). Ultrasonic welding is recommended for polymer tab connection to obtain low-resistance, high-reliability and light-weight properties;(5). Polymer packs shouldbe designed carefully so that no shear force is applied, and also, no heat is generated even when leakage ocurs for mishaps. PCM from electrolyte leakage should be isolated as perfectly as posible, and narrow distance between bare circuit patterns should be avoided.
|
Q3. What gases are generated in the formation process. Are they dangerous? |
The generated gases include Co, CO2,H2, CH4 and so on. They are not dangerous because of low volume.
|
Q4. What should be known with regard to handling of battery cells? |
1. Aluminum Laminate Film: Easily damaged by sharp edge parts such as Ni-tabs,pins and needles, compared with metal-can-case Li-Po cells.
|
Q5. Why do Li-Po batteries bloat/swell? |
The Li-Po batteries may bloat or swell due to the following reason:
|
Q6.Could I fast charge the Li-Po batteries? If yes, under what conditions? |
Please follow the suppliers'suggestions and DO NOT fast charge the Li-Po batteries.If you need to do this under urgent conditions, please make sure to use a qualified balance charger. Frequent fast charging will shorten the batteries'lifetime. |