Send Message
Home Application 8000mah 6s Lipo Battery 12C 23.52V 6 Cell UAV Drone Motor Battery Commercial Drone Battery
8000mah 6s Lipo Battery 12C 23.52V 6 Cell UAV Drone Motor Battery Commercial Drone Battery

8000mah 6s Lipo Battery 12C 23.52V 6 Cell UAV Drone Motor Battery Commercial Drone Battery

Li-Po Battery
8000mAh
Chat Now
Service Hotline:
0752-2322511
High Rate Discharge Li-Po Battery

Fullymax focuses on the high rate discharge pouch batteries, including power batteries for electric aviation aircraft (eVTOL), electric power , drones, electronic cigarettes, fast charging batteries,12V/48V Start/Stop batteries and jump starter for car, RC professional remote control models and toy , military and special equipment, etc. FULLYMAX batteries are also widely used in smart home like sweeping robots, vacuum cleaners, small power tools, etc.; 3C consumer electronics like remote control handles, beauty equipment, portable projectors, etc., smart Bluetooth products, medical equipment ,ect

Industry-leading high temperature & high power discharging capability
Outstanding gravimetric Energy density: max 280Wh/kg
Low IR, low temperature rising, low self-discharging
Longer cycle life:1C ≥1000 cycles , 100% DOD
Good consistency, stable performance
LCO(4.2V/4.35V/4.4V/4.45V),LFP and NCM ,Flexible customized solution
Product Details
Place of Origin:
China
Brand Name:
FULLYMAX
Model Number:
FB8000VV-6S-XT90-S
User-defined Attribute
Battery Type:
Li-Po Battery
Capacity:
8000mAh
Volts:
23.52V
Configuration:
6S1P
Watt Hours:
188.16Wh
Max Continous Discharge:
12C (96A)
Charge Rate:
1C (8A)
Max Charge Rate:
2C (16A)
Max Volts Per Cell:
4.45V
Max Volts Per Pack:
26.70V
Weight:
822 G
Dimensions (mm):
47.2 X 61 X 139 Mm
Balancer Connector Type:
JST-XHR
Dsicharge Plug:
XT90-S
Wire Gauge:
AWG10# Silicon Wire
Wire Length:
100mm
High Light:

lipo 8000mah

,

8000mah lipo battery

,

lipo battery 8000mah

 

 

8000mah 6s Lipo Battery 12C 23.52V 6 Cell UAV Drone Motor Battery Commercial Drone Battery 0

Fullymax NEW High Voltage battery packs FB8000VV-6S-XT90-S 23.52V 12C 6cell UAV Drone Battery

 

Fullymax have been working on increasing drone battery energy density with endless effort! The NEW High Voltage battery packs (LiHV) of max voltage 4.45V for each single cell, with energy density reaches max 280Wh/kg and extreme long cycle life, embodies years of technology precipitation and development, providing longer flight time and perfection for a variaty of missions. Fullymax High Voltage batteries (LiHV) with max 4.45V/cell are suitable for all types of industry drones, such as eVTOL, UAM, cargo transport, mapping, filming, agricultrue, and underwater robotics.

 

Details:

 

Application
Agricultural Spraying Drone UAV
Battery type
LI-PO
Type
Li-Ion/lithium/lifepo4
Capacity
8000mAh
OEM/ODM
Accepatable
Nominal Voltage
23.52V
Size
47.2 x 61 x 139mm
Keywords
Longlife Cycles

 

 

 

 

8000mah 6s Lipo Battery 12C 23.52V 6 Cell UAV Drone Motor Battery Commercial Drone Battery 1     Related Feature

8000mah 6s Lipo Battery 12C 23.52V 6 Cell UAV Drone Motor Battery Commercial Drone Battery 2

For other configurations (without discharge plug) with same cell model, please refer below table.

 

 

 

Battery pack Model Description Max cont. discharge Dimensions (H x W x L)  Weight Wh
FBC8000VV-1S 8000mAh 3.92V 1cell 12C 7.4 x 59 x 129mm 123.00g 31.36
FBC8000VV-6S 8000mAh 23.52V 6cell 12C 47.2 x 61 x 139mm 822.00g 188.16
FBC16000VV-6S2P 16000mAh 23.52V 12cell 12C 92 x 61.5 x 143mm 1,595.00g 376.32
FBC16000VV-12S2P 16000mAh 47.04V 24cell 12C 182 x 62 x 143mm 3,150.00g 752.64

 

 

 

 

 


8000mah 6s Lipo Battery 12C 23.52V 6 Cell UAV Drone Motor Battery Commercial Drone Battery 3 Product Feature

8000mah 6s Lipo Battery 12C 23.52V 6 Cell UAV Drone Motor Battery Commercial Drone Battery 2

- LiHV Chemistry with MAX 4.45V/cell (Requires LiHV capable charger)

 

- Energy density reaches max 280Wh/kg

 

- 1000 times cycle life

 

- Max 2C fast charging supported

 

- Excellent power energy density for variety of missions

 

- Ultra safety and reliability performance

 

- Professional and excellent pre/after-sales service

 

- ISO international and AS9100 quality certifications assures battery high safety and reliability performance

 

 

 

8000mah 6s Lipo Battery 12C 23.52V 6 Cell UAV Drone Motor Battery Commercial Drone Battery 3 Application

8000mah 6s Lipo Battery 12C 23.52V 6 Cell UAV Drone Motor Battery Commercial Drone Battery 2

 

Fullymax FB8000VV-6S-XT90-S High Voltage batteries (LiHV) with max 4.45V/cell are suitable For all types of industry drones, no matter in the field of eVTOL, UAM, aerial photography, transport delivery, surving and mapping, rescue, underwater, aerial inspections, etc.

 

 

 

8000mah 6s Lipo Battery 12C 23.52V 6 Cell UAV Drone Motor Battery Commercial Drone Battery 3      Packaging & Shipping

8000mah 6s Lipo Battery 12C 23.52V 6 Cell UAV Drone Motor Battery Commercial Drone Battery 2

Regular Safety Packing Or As Customer's Requirements.

Shipping By Sea, Air Or UPS, DHL, FedEx Express.

 

PAYMENT TERMS

8000mah 6s Lipo Battery 12C 23.52V 6 Cell UAV Drone Motor Battery Commercial Drone Battery 9

 

EXPRESS OPTIONS

8000mah 6s Lipo Battery 12C 23.52V 6 Cell UAV Drone Motor Battery Commercial Drone Battery 10

 

 

 

 

8000mah 6s Lipo Battery 12C 23.52V 6 Cell UAV Drone Motor Battery Commercial Drone Battery 3    Manufacturing Capability

8000mah 6s Lipo Battery 12C 23.52V 6 Cell UAV Drone Motor Battery Commercial Drone Battery 2

Capacity&Leadtime

 

 

● Stacking/per day:50Kpcs

 

● Winding/per day:5,00Kpcs

 

● Regular Model:≤8 weeks

 

● Customized:16-18 weeks(The first order, if nonew facility added )

 

8000mah 6s Lipo Battery 12C 23.52V 6 Cell UAV Drone Motor Battery Commercial Drone Battery 13 8000mah 6s Lipo Battery 12C 23.52V 6 Cell UAV Drone Motor Battery Commercial Drone Battery 14

 

The new plant will be located in the Dongjiang Bay Industrial Park, which will be a national high-end industrial park special for new energy, new information technology and intelligent equipment fields based on the “3+7” industrial park planning and deployment proposed by Huizhou relying on the Greater Bay Area, aiming to integrate Huizhou’s “1+4” industrial parks. The area of the new plant is estimated to be 30,000 square meters. With new high-end equipment and workshop environment, the goal is to build a high-end production line dedicated to high-end customers.

 

 

 

8000mah 6s Lipo Battery 12C 23.52V 6 Cell UAV Drone Motor Battery Commercial Drone Battery 3     Quality Management Syste

8000mah 6s Lipo Battery 12C 23.52V 6 Cell UAV Drone Motor Battery Commercial Drone Battery 2

Management Improvement according to international standards

 

8000mah 6s Lipo Battery 12C 23.52V 6 Cell UAV Drone Motor Battery Commercial Drone Battery 17 8000mah 6s Lipo Battery 12C 23.52V 6 Cell UAV Drone Motor Battery Commercial Drone Battery 18

 

Safety and environmental Certificates

capability&service

  • Simulation tests of safety certificates proceeded
  • Service of certificates application for customers

8000mah 6s Lipo Battery 12C 23.52V 6 Cell UAV Drone Motor Battery Commercial Drone Battery 19

 

Performance Test Capability

 

  • Electric Performance Test
  • Safety Performance Test
  • Mechanical Performance Test
  • Environmental Performance Test
  • Storing Performance Test

 

 

 

8000mah 6s Lipo Battery 12C 23.52V 6 Cell UAV Drone Motor Battery Commercial Drone Battery 3 FAQ

8000mah 6s Lipo Battery 12C 23.52V 6 Cell UAV Drone Motor Battery Commercial Drone Battery 2

Q1. What are the diferences betwee high C-rate and low C-rate lithium?

polymer (Li-Po) batteries.
In general, the diferences lie in the materials made of the positive & negative terminals, the area density design, the electrolyte ingredient, the septum data and the density of inside pieces.

 

 

Q2. How is a Li-Po battery made?

When a Li-Po battery is made, five main aspects should be considered carefully:

(1). Battery Pack should have suficient strength, so that the polymer battery inside could be efectively protected from mechanical shocks;

(2). The polymer cell should be fixedto the battery pack onits large surface area - no cell movement in the battery packshould be allowed;

(3). No sharp edge components should be inside the packcontaining the polymer battery, and meanwhile, suficient insulation layer between wiring and the cell should be used to maintain multiple safety protection;

(4). Ultrasonic welding is recommended for polymer tab connection to obtain low-resistance, high-reliability and light-weight properties;(5). Polymer packs shouldbe designed carefully so that no shear force is applied, and also, no heat is generated even when leakage ocurs for mishaps. PCM from electrolyte leakage should be isolated as perfectly as posible, and narrow distance between bare circuit patterns should be avoided.

 

 

Q3. What gases are generated in the formation process. Are they dangerous?

The generated gases include Co, CO2,H2, CH4 and so on. They are not dangerous because of low volume.

 

 

Q4.

How to Charge li-Po battery?

1. Charging Current: Charging current should be less than the maximum charging current listed in specifications. Charging with higher current than recommended may cause serious damage to cell performance and safety features,leading to heat generation or leakage.


2. Charging Voltage: Charging should be performed at a voltage less thanthat listed in specifications (4.20V/cell). Charging at above 4.25V-the absolute maximum voltage, must be strictly prohibited.The chargers used should have this voltage limitation function. Charging with higher voltage than specified is very dangerous, which may cause serious damage to the cell performance and safety features, leading
to heat generation or leakage.


3. Charging Temperature: The cells should be charged within a range of temperatures listed in the specifications. Always let the batteries cool down to ambient temperature before charging.


4. Prohibition of Reverse Charging: Do not reverse the positive(+) and negative(-) terminals. Otherwise, the batery pack wil be reverse-charged and abnormal chemical reactions may ocur. Ecesively high current may flow during recharging, possibly leading to damage, overheating, smoke emission, bursting and/or ignition.


5. Use specific Li-Po charger only. DO NOT use a Ni-MH or Ni-Cd charger. It is your responsibility solely to ensure that the charger you purchased works properly.


6. Never charge batteries unattended. Always monitor charging process to assure batteries are being charged properly. Always charge the batteries in an isolated and safe area away from any flammable or/and combustible materials.

 

 

Q5. Why do Li-Po batteries bloat/swell?
The Li-Po batteries may bloat or swell due to the following reason:
1. Overcharging:Normally, the maximum charge voltage is 4.2V for RC batteries. If the batteries were overcharged beyond 4.4V, electrolytic oxidation process would happen, which generates mass gas leading to battery swelling.
2. Overheat:When discharging in high temperature or high C rate, the temperature of the inner part of the battery can be even higher, which gasify the electrolyte and results in swelling.
3. Shot-circuit.:If short circuit happened, the cell voltage would drop very fast and the electrolyte would be reactive to generate gases, leading to battery swelling.
4, Sealing:If sealed without proper processing, the battery cell would have water and air in, so that the electrolyte would be reactive to generate gases, leading to battery swelling.