Send Message
Home Application 7.4V 900mAh 30C LiPO Battery for FPV Drone RC Helicopter Model Buggy Crawler Truck
7.4V 900mAh 30C LiPO Battery for FPV Drone RC Helicopter Model Buggy Crawler Truck

7.4V 900mAh 30C LiPO Battery for FPV Drone RC Helicopter Model Buggy Crawler Truck

900mAh
2S / 2Cell / 7.4V
Chat Now
Service Hotline:
0752-2322511
High Rate Discharge Li-Po Battery

Fullymax focuses on the high rate discharge pouch batteries, including power batteries for electric aviation aircraft (eVTOL), electric power , drones, electronic cigarettes, fast charging batteries,12V/48V Start/Stop batteries and jump starter for car, RC professional remote control models and toy , military and special equipment, etc. FULLYMAX batteries are also widely used in smart home like sweeping robots, vacuum cleaners, small power tools, etc.; 3C consumer electronics like remote control handles, beauty equipment, portable projectors, etc., smart Bluetooth products, medical equipment ,ect

Industry-leading high temperature & high power discharging capability
Outstanding gravimetric Energy density: max 280Wh/kg
Low IR, low temperature rising, low self-discharging
Longer cycle life:1C ≥1000 cycles , 100% DOD
Good consistency, stable performance
LCO(4.2V/4.35V/4.4V/4.45V),LFP and NCM ,Flexible customized solution
Product Details
Place of Origin:
China
Brand Name:
FULLYMAX
Model Number:
FB900HP-2S
User-defined Attribute
Capacity:
900mAh
Voltage:
2S / 2Cell / 7.4V
Discharge Rate:
30C
Max Burst Rate:
60C
Weight:
56g
Dimensions:
13.2x26x71mm
Wire Gauge:
AWG18#
Wire Length:
100mm
Discharge Plug:
JST
High Light:

Crawler Truck 30C LiPO Battery

,

RC Helicopter LiPO Battery

7.4V 900mAh 30C LiPO Battery for FPV Drone RC Helicopter Model Buggy Crawler Truck 0  

Fullymax 7.4V 900mAh 2S 30C li-po batteries with JST BEC connector

 

Fullymax 900mAh 2S Lipo is an 7.4V 900mAh LiPo battery. These 900mAh 2S LiPo batteries provide high quality, reliable power for RC helicopters, RC airplane, RC aircraft, RC cars, etc. Fullymax 900mAh 7.4V LiPo battery is one of the top rank battery corporations with deep research and manufacturing on LI-PO by the effort of more than 130 professional engineers and technicians with 22 years exquisite battery technology.

 

The Fullymax brand holds the core values of "Customer first Integrity and professionalism Scientific innovation Win-win cooperation". All batteries are tailored for various scales of the RC Models such as electronic cars, nitro cars, airplanes, vessels and also other models, toys, electric tools, electric bikes, electric autos, digital products etc.

 

 

Related Product

For other configurations (without discharge plug) with same cell model, please refer below table.

 

Battery pack Model Description Max cont. discharge Burst (3Sec) Dimensions H x W x L Weight Wh
FB900HP-1S 3.7V 900mAh 1cell 30C 60C 7.2x26x71mm 34.00g 3.33
FB900HP-2S 7.4V 900mAh 2cell 30C 60C 13.2x26x71mm 56.00g 6.66
FB900HP-3S 11.1V 900mAh 3cell 30C 60C 19.8x26x71mm 78.00g 9.99

 

 

 

Product Feature

 

- Capable of maximum continuous discharge rates up to 30C.

 

- Equipped with balancing leads and a connector that are compatible with most balancers and balancing chargers.

 

- Cater for almost every application and user alike.

 

 

 

Application

 

Compatible with FPV Drone, RC Helicopter Model, Buggy Crawler Truck, etc.(Only if the voltage and the plug match, then it will fit.)

 

 

 

Manufacturing Capability 

 

 

Capacity&Leadtime

 

   ●  Stacking/per day:50Kpcs

 

   ● Winding/per day:2,00Kpcs

 

  

 

 

● Regular Model:≤8 weeks

 

● Customized:16-18 weeks(The first order, if nonew facility added )

 

7.4V 900mAh 30C LiPO Battery for FPV Drone RC Helicopter Model Buggy Crawler Truck 1 7.4V 900mAh 30C LiPO Battery for FPV Drone RC Helicopter Model Buggy Crawler Truck 2

 

 

The new plant will be located in the Dongjiang Bay Industrial Park, which will be a national high-end industrial park special for new energy, new information technology and intelligent equipment fields based on the “3+7” industrial park planning and deployment proposed by Huizhou relying on the Greater Bay Area, aiming to integrate Huizhou’s “1+4” industrial parks. The area of the new plant is estimated to be 30,000 square meters. With new high-end equipment and workshop environment, the goal is to build a high-end production line dedicated to high-end customers.

 

 

Quality Management System
Management Improvement according to international standards
7.4V 900mAh 30C LiPO Battery for FPV Drone RC Helicopter Model Buggy Crawler Truck 3 7.4V 900mAh 30C LiPO Battery for FPV Drone RC Helicopter Model Buggy Crawler Truck 4 7.4V 900mAh 30C LiPO Battery for FPV Drone RC Helicopter Model Buggy Crawler Truck 5 7.4V 900mAh 30C LiPO Battery for FPV Drone RC Helicopter Model Buggy Crawler Truck 6 7.4V 900mAh 30C LiPO Battery for FPV Drone RC Helicopter Model Buggy Crawler Truck 7

ISO9001

Quality Management System

ISO14001

Environmental Management System

Occupational Health And

Safety Management System

Hazardous Substance Process

Management System

Aeroepace Quality Systems

AS9100D:2016

 

 

Safety and environmental Certificates capability&service

  • Simulation tests of safety certificates proceeded
  • Service of certificates application for customers

       7.4V 900mAh 30C LiPO Battery for FPV Drone RC Helicopter Model Buggy Crawler Truck 8

 

Performance Test Capability

 

  • Electric Performance Test
  • Safety Performance Test
  • Mechanical Performance Test
  • Environmental Performance Test
  • Storing Performance Test
     

 

 

 

 

FAQ

Q1. What are the diferences betwee high C-rate and low C-rate lithium?

polymer (Li-Po) batteries.
In general, the diferences lie in the materials made of the positive & negative terminals, the area density design, the electrolyte ingredient, the septum data and the density of inside pieces.

 

Q2. How is a Li-Po battery made?

When a Li-Po battery is made, five main aspects should be considered carefully:

(1). Battery Pack should have suficient strength, so that the polymer battery inside could be efectively protected from mechanical shocks;

(2). The polymer cell should be fixedto the battery pack onits large surface area - no cell movement in the battery packshould be allowed;

(3). No sharp edge components should be inside the packcontaining the polymer battery, and meanwhile, suficient insulation layer between wiring and the cell should be used to maintain multiple safety protection;

(4). Ultrasonic welding is recommended for polymer tab connection to obtain low-resistance, high-reliability and light-weight properties;(5). Polymer packs shouldbe designed carefully so that no shear force is applied, and also, no heat is generated even when leakage ocurs for mishaps. PCM from electrolyte leakage should be isolated as perfectly as posible, and narrow distance between bare circuit patterns should be avoided.

 

Q3.What are the gases inside a swelling cell, and are they toxic/dangerous?

The gases vary depending on different situations:

1. If the gases were generated by electrolyte gas reaction, they would mainly beelectrolyte solvent components, for example: EC, DMC, EMS and so on;

2. If the gases were generated by overcharging, they would mainly be H2, CO, CO2,CH4 and so on;

3, If the gas were generated by improper sealing, they would mainly be H2, C2,H2and so on.
All of these gases are not dangerous due to low volume.

 

Q4. Why do we need formation process?

Organic solvents easily decompose on the negative electrodes during charging, leading to battery swelling, drop of cell capacity, and unsafety caused by active
reaction. The purpose of the formation process is to form a solid layer called the solid electrolyte interphase (SEl), which is electrically insulating yet provides significant ionic conductivity. This interphase prevents further decomposition of the electrolyte after the second charging.

 

Q5. Why do Li-Po batteries bloat/swell?
The Li-Po batteries may bloat or swell due to the following reason:
1. Overcharging:Normally, the maximum charge voltage is 4.2V for RC batteries. If the batteries were overcharged beyond 4.4V, electrolytic oxidation process would happen, which generates mass gas leading to battery swelling.
2. Overheat:When discharging in high temperature or high C rate, the temperature of the inner part of the battery can be even higher, which gasify the electrolyte and results in swelling.
3. Shot-circuit.:If short circuit happened, the cell voltage would drop very fast and the electrolyte would be reactive to generate gases, leading to battery swelling.
4, Sealing:If sealed without proper processing, the battery cell would have water and air in, so that the electrolyte would be reactive to generate gases, leading to battery swelling.