Fullymax focuses on the high rate discharge pouch batteries, including power batteries for electric aviation aircraft (eVTOL), electric power , drones, electronic cigarettes, fast charging batteries,12V/48V Start/Stop batteries and jump starter for car, RC professional remote control models and toy , military and special equipment, etc. FULLYMAX batteries are also widely used in smart home like sweeping robots, vacuum cleaners, small power tools, etc.; 3C consumer electronics like remote control handles, beauty equipment, portable projectors, etc., smart Bluetooth products, medical equipment ,ect
|
FULLYMAX STAMINA 5000mAh 70C 22.2V 6S lithium polymer batteries
Fullymax Stamina Batteries have witnessed success and achievements of world known pilots like Kenny Ko, Tareq Alssadi, and Kan Poonnoi in heliocopter model races, such as Rotor Live, Dubai Master, and 3D Global, etc. The 22.2V 5000mAh 6S1P 70C is widely used and a key part of wining.
Fullymax Stamina Batteries have redefined the RC lipo battery industry, with a vison to become a global leading new energy enterprise with high rate discharge battery as the core. Dedicated within the RC helicopter industry, along with a rapid advancement in the airplane & multi rotor segment, Fullymax has quickly become the choice of pro level pilots and beyond, filling the flight line with pilots of all skill levels & demands.
|
Related Product
For other configurations (without discharge plug) with same cell model, please refer below table.
| Battery pack | Model Description | Max cont. discharge | Burst (3Sec) | Dimensions H x W x L | Weight | Wh |
| FB5000XT-1S | 3.7V 5000mAh 1cell | 70C | 120C | 8x45x148.5mm | 121.00g | 18.50 |
| FB5000XT-2S | 7.4V 5000mAh 2cell | 70C | 120C | 17.8x46x158.5mm | 295.00g | 37.00 |
| FB5000XT-3S | 11.1V 5000mAh 3cell | 70C | 120C | 25.8x46x158.5mm | 416.00g | 55.50 |
| FB5000XT-4S | 14.8V 5000mAh 4cell | 70C | 120C | 34x46.5x158.5mm | 539.00g | 74.00 |
| FB5000XT-5S | 18.5V 5000mAh 5cell | 70C | 120C | 42x46.5x158.5mm | 660.00g | 92.50 |
| FB5000XT-6S | 22.2V 5000mAh 6cell | 70C | 120C | 50x46.5x158.5mm | 786.00g | 111.00 |
| FB5000XT-7S | 25.9V 5000mAh 7cell | 70C | 120C | 63x47.5x160mm | 946.00g | 129.50 |
| FB5000XT-12S | 44.4V 5000mAh 12cell | 70C | 120C | 51x53x317mm | 1,587.00g | 222.00 |
Product Feature
- Long cycle life, work longer and durable.
- Safe use. Lithium iron phosphate has been strictly tested.
- Good high temperature charging performance.
- Light Weight
- Applications: RC Lipo Battery, Helicopter Battery, Airplane Battery.Ideal For 550-size to 600-size helicopter with 6S config (T-Rex 550L, Goblin 570) or 700-size to 800-size helicopter (12S config)
Application
Ideal For 550-size to 600-size helicopter with 6S config (T-Rex 550L, Goblin 570) or 700-size to 800-size helicopter (12S config)
Packaging & Shipping
Regular Safety Packing Or As Customer's Requirements.
Shipping By Sea, Air Or UPS, DHL, FedEx Express.
PAYMENT TERMS
EXPRESS OPTIONS
Manufacturing Capability
|
Capacity&Leadtime
|
|
|
● Stacking/per day:50Kpcs
● Winding/per day:5,00Kpcs
|
● Regular Model:≤8 weeks
● Customized:16-18 weeks(The first order, if nonew facility added )
|
|
|
| The new plant will be located in the Dongjiang Bay Industrial Park, which will be a national high-end industrial park special for new energy, new information technology and intelligent equipment fields based on the “3+7” industrial park planning and deployment proposed by Huizhou relying on the Greater Bay Area, aiming to integrate Huizhou’s “1+4” industrial parks. The area of the new plant is estimated to be 30,000 square meters. With new high-end equipment and workshop environment, the goal is to build a high-end production line dedicated to high-end customers. |
|
|
| Management Improvement according to international standards |
|
|
|
|
|
Safety and environmental Certificates capability&service |
|
| Performance Test Capability |
|
FAQ
| Q1. What are the diferences betwee high C-rate and low C-rate lithium? |
|
polymer (Li-Po) batteries.
|
| Q2. How is a Li-Po battery made? |
|
When a Li-Po battery is made, five main aspects should be considered carefully: (1). Battery Pack should have suficient strength, so that the polymer battery inside could be efectively protected from mechanical shocks; (2). The polymer cell should be fixedto the battery pack onits large surface area - no cell movement in the battery packshould be allowed; (3). No sharp edge components should be inside the packcontaining the polymer battery, and meanwhile, suficient insulation layer between wiring and the cell should be used to maintain multiple safety protection; (4). Ultrasonic welding is recommended for polymer tab connection to obtain low-resistance, high-reliability and light-weight properties;(5). Polymer packs shouldbe designed carefully so that no shear force is applied, and also, no heat is generated even when leakage ocurs for mishaps. PCM from electrolyte leakage should be isolated as perfectly as posible, and narrow distance between bare circuit patterns should be avoided.
|
| Q3. What gases are generated in the formation process. Are they dangerous? |
|
The generated gases include Co, CO2,H2, CH4 and so on. They are not dangerous because of low volume.
|
| Q4.How many cycles should I expect for a RC Li-Po battery? |
|
In general situation of lower c-rate discharging, the lifetime of a RC Li-Po batery should reach more than 500 cycles while its capacity remains 80%.
|
| Q5. Why do Li-Po batteries bloat/swell? |
| The Li-Po batteries may bloat or swell due to the following reason: 1. Overcharging:Normally, the maximum charge voltage is 4.2V for RC batteries. If the batteries were overcharged beyond 4.4V, electrolytic oxidation process would happen, which generates mass gas leading to battery swelling. 2. Overheat:When discharging in high temperature or high C rate, the temperature of the inner part of the battery can be even higher, which gasify the electrolyte and results in swelling. 3. Shot-circuit.:If short circuit happened, the cell voltage would drop very fast and the electrolyte would be reactive to generate gases, leading to battery swelling. 4, Sealing:If sealed without proper processing, the battery cell would have water and air in, so that the electrolyte would be reactive to generate gases, leading to battery swelling. |
| Q6.How should I dispose of my Li-Po batteries safely? |
|
The waste bateries are better to be handled by professional recycling factories. If not, |
